Phone: 310-787-0337   Fax: 310-787-7350
Total Items: 0
View Cart Checkout
Search:   
 
ESD Test Meters
ESD Test Meters are primarily used to test the performance of the wrist straps, heel grounders, ESD shoes and other ESD products. Surface Resistance Meters are used to measure the resistivity of the ESD worksurface and floor mats and the Wrist Strap Test Meters verify a continuous path between the wrist band and a coil cord.
Part Number Description Price Qty Purchase
ESD Wrist Strap Test Meters
ESD Wrist Strap Test MeterESD Wrist Strap Test Meters ensure that basic ESD protection is met by quickly and accurately measuring the resistance between an operator, wrist strap and ground cord. With a test voltage of 9 volts DC, the unit is especially designed to test without harm to the operator. It verifies a continuous grounding path between a wrist band and coil cord by indicating three levels of resistance: “HI”, “LO” and “OK” with an easy to read LED light and an audible alarm. Test parameters are factory set to pass 800K-10M, but it’s adjustable to match your own specifications.
EMWST-1 ESD Wrist Strap Test Meter $98.00
ESD Combination Test Meters Technical Datasheet
ESD Combination Test MetersESD Combination Test Meters will check wrist straps, heel grounders, and ESD shoes. Designed for manufacturing areas, this tester is self-supporting, standalone, and portable. Stainless steel base and test button for durability. The solid metal stand pole bolts to base for strength. An included AC adapter or 9-volt battery provides power. The tester indicates good resistance, high resistance and low resistance. Connects to wrist strap by banana plug, clip, or 10mm snap. Meets ANSI/ESD S20.20 ESD Control Program requirements.
EMCT-1 ESD Wrist Strap, a Heel Grounder and ESD Shoes Test Meter $536.00
ESD Surface Resistance Meters Technical Datasheet
ESD Surface Resistance MeterESD Surface Resistance Meters are portable, battery-operated survey instruments for evaluating the resistive properties of surfaces such as static dissipative packaging, flooring, or work surfaces over the range of 10^3 to 10^12 ohms or ohms per square. This pocket size meter uses parallel electrodes on the back of the meter. Perfect for periodic verification, factory audits or test lab evaluation of a product. It meets periodic test requirements per compliance verification ESD TR53 and conforms to ANSI/EOS/ESD S4.1, S7.1, S12.1, S2.1 standards.
EMSR-1 ESD Surface Resistance Meter $498.00