| ESD Gloves |
 Conductive Gloves are made of 13 ga Polyester and Silver composite fiber. These conductive gloves offer superior conductivity of 104 and has 1 ohms drop from the finger tip to wrist. They are moisture resistant while offering static free performance. These gloves are ambidextrous which allows flexibility and reduces fatigue and are washable. Complies with ESDA S1.1, EIA 625 and MIL-STD 1686. Packaged as 12 pair/pack
Applications: Electronic Assembly, Hospital, Medical Equipment, Pharmaceutical, Photonics & Semiconductor. |
 Latex Gloves provides the best value and are designed for cleanroom and static charged environment. These Gloves are powder free and ambidextrous and are made of Latex. They have textured surface and beaded cuffs. Surface resistivity is 1011. Static decay of 2 seconds and triboelectric charge of 50V max. It is compatible with ASTM D-6319 standards. Packaged as 100/bag.
Applications: Electronic Manufacturing, Hospitals, Medical Equipment, Pharmaceutical, Photonics and Semiconductor. |
 Nitrile_Gloves are designed for use in particle sensitive and low contaminate environments. These Nitrile Gloves feature a rolled cuff, ambidextrous fit, textured finger tips, a very low pinhole level (AQL 1.5) and are powder-free.They contain no natural Latex protein.The broad chemical resistance make them ideal for electrostatic discharge sensitive applications. Packages as 100/bag.
Applications: Cleanroom, Electronics manufacturing, Semiconductor facilities, Hospitals, Pharmaceutical and Photonics |
 ESD Nylon Gloves also known as Conductive Gloves are made of dust free nylon fabric knitted with nylon and carbon filament yarns coated with Polyurethane on palm and fingers. They are seamless, elastic and provides non-slip surface. These conductive gloves offer superior conductivity of 106 to108. Packaged as 10 pairs/bag.
Applications: Electronic manufacturing, Hospitals, Medical Equipment, Pharmaceutical, Photonics and Semiconductor facilities. |
 ESD Polyester Gloves are made of Polyester material and are used in Electronic assembly where static charge is a concern. These ESD gloves are designed to work with static sensitive devices where bear hand are not desired. These gloves can be worn instead of a wristband. It has 7mm studs that fits a grounding cord with 7mm snap. ESD Polyester gloves are suitable for class 1000 - 10,000 cleanroom environment. Conductive yarn is spaced every5mm to dissipate a charge at a higher rate. Material is washable and gloves can be reused. RTT between two points is <107.
Packaged as10 pairs/bag.
Applications: Electronic manufacturing, Semiconductor industry and Medical device manufacturing. |
 Vinyl Gloves are 9" long and are compatible with class 10000 environment. They are powder free and have a Low Pinhole Level (AQL 2.5). These powder free gloves are made of Poly Vinyl Chloride and are Ambidextrous with beaded cuff. Surface resistivity is 1011. It can reduce a 15KV static charge to 0 in less than 2 seconds. Compatible with MIL-B-81705B, DOD-HDBK-257 <0.10 ohms per square. Packaged as 100/bag.
Applications: Photonics, Semiconductor, Electronic contract manufacturing and Medical equipment. |
|
