| Part number | Quantity | Unit Price | Subtotal |
|---|
Subtotal:$ 0.00
|
ESD Products
Cleanroom Products
Conductive Products
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|||||||||
 |
||
|
|
|
|||||||||
|
||
|
ESD Products
Cleanroom Products
Conductive Products
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Metal Bench Mount Ground Block offers the common ground point required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20. The metal enclosed box mounts under front edge of workstation. Includes a 15′ long ground cable with #10 ring terminal connector. Two banana jack receptacles for secure ground connections. Two parking studs (4mm) for storing cords when not in use. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1
Common Ground Point are standard with two banana jacks, 10mm male snap, and a 1 meg resistor. They are available with a large O-ring for military applications or with a bull dog clip for field service mats. They are made from rugged vinyl and come standard with 15’ cords .Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1
Low Profile Ground Point has a low profile design and comes with 10mm male or female snaps. They are made from rugged vinyl and come standard with 15’ cords. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1
Snap Tool, Studs and Sockets provides grounding point into table top or floor mats.